g parameter
英 [dʒiː pəˈræmɪtə(r)]
美 [dʒiː pəˈræmɪtər]
【电】g参数
双语例句
- The next parameter in the example is – g which is used to specify the group.
示例中的下一个参数是–g，它用于指定分组。 - You specify cache size using the parameter-Xscmx [ k| m| g]; this parameter only applies if a new cache is created by the JVM.
使用参数-Xscmx[kmg]指定缓存的大小；这个参数只应用于JVM创建新缓存的情况。 - G code interpreting, system parameter modification, G code editing, tool parameter setting, tool compensation, etc.
该系统包括G代码解释、系统参数修改、G代码编辑、刀具参数设置和刀具补偿等功能。 - For milk powder, higher precision was shown using the colorimetric value G as a characteristic parameter by DIC method.
以乳粉为研究对象，采用数字图像采集方式，以色度G值作为特征参数，可以获得较高的检测精度。 - Apply Matrix Method to Fit Coupling Parameter J and Landau Factor g of a New Magnetic Material
用矩阵法拟合新磁性材料的耦合参数J及朗道因子g - The iso-conversional method was suitable to analyze at the crystallization rate constant K, the activation energy of crystallizing Ed, the nucleation parameter ψ, and was unsuitable to analyze the liner growth rate G.
用等转化率法适用于解析结晶速率常数K，结晶活化能Ed，成核参数ψ等参数，但不适用于求解线生长速率G。 - The nonlinear interaction between the pump and the signal light in the optical parameter amplifing process in optical fiber is analyzed, and the signal gain G, is got.
分析了光纤光参量放大过程泵浦光与信号光的非线性相互作用，得到信号光增益Gs。 - The microcosmic origin of the EPR parameters have ben studied, and indicated that the contribution of the spin doublets for the ZFS parameter D is very important, and for the ground state g factor it can be omitted.
研究了EPR参量的微观起源及自旋二重态对EPR参量的贡献，指出自旋二重态对零场分裂参量的贡献不可忽略，二重态对g因子的贡献甚微。 - The parameter G10 can be used to describe quantitatively the convergent degree of Green function Gj. According to the above idea, a scheme of microcomputer-based on-line monitoring and diagnostic system of ball bearing fault is proposed.
参数G（10）可以定量地描述Gj的衰减程度，依据这一点，本文提出了一个用微型计算机的球轴承故障在线监视与诊断系统的方案。 - The measuring capability index C g is an important parameter for the assessment of testing devices.
测量能力指数Cg是评定检测器具测量能力的重要指标。 - It is proved that for any group G there is a corresponding "intrinsic group" G which is the generalization of the second parameter group in the'Lie group. Group G and G are commutable and anti-isomorphic.
对任一群G可以引入一个对应的内禀群G，G和G对易且反同构，它是李群中第二参数群的推广。 - The Improvement of Parameter D and Gyromagnetic Factors in Trigonal Symmetry Field with Considering the Effect of the Spin& Orbit Coupling of the Ligand Ions
三角对称晶场中配体旋&轨耦合效应对D值和g因子的改进 - This paper presents a two spin-orbit ( SO) coupling parameter model of g factor for Ni2+-6X-clusters. Using this model, the g factors of NaCl: Ni2+ and NaBr: Ni2+ are calculated.
本文提出一个计算Ni~（2+）-6X~-络合物g因子的双自旋-轨道耦合系数模型，并用以计算NaCl：Ni~（2+）和NaBr：Ni~（2+）的g因子。 - To make the problem simple, the paper introduces a new parameter G ( I) for the mass of strip products.
为了简要地说明问题，对带钢产品的重量引进了一个新的参数G（I），并建立了一个表示剪切量调整变化的矩阵Y（I，J）。 - The relationship of the model parameter with dimensionless similarity number Ct and the momentum ratio of annular jet flow to concentric jet flow Gr is also given in the experiment conditions.
给出了实验范围内模型参数与无量纲相似准数Ct和喷嘴环隙与中心射流动量比Gr之间的关系。 - Test results show that the critical Fr inducing pipeline instability is linear with dimensionless pipeline weight parameter ( G), and that when G is bigger than a special value, the pipeline will be laterally stable and tend to be buried by sand.
试验结果表明，管重无量纲数G与管道失稳的临界Fr数之间大致呈线性关系，而当G超过一定数值时，管道是侧向稳定的。 - We use G value as the main parameter of controlling joint P-P? P-SV acquisition geometry design, and derive the method of optimizing joint P-P? P-SV acquisition geometry design after analyzing the relation between G value and incident angles.
以G值作为控制PP、PSV波联合采集观测系统设计的主要参数，通过分析G值与入射角的关系，得出优化PP、PSV波联合采集观测系统设计的方案。 - The results are equivalent to the results gained though the g parameter method while they have clearer physical meanings and stability criterion of folded cavity becomes more directly.
该结果与传统的g参数等价法表示的稳定区是等价的，同时克服了传统的g参数判定方法物理意义不清晰的缺点，使折叠腔稳定性判别更直观。 - The effect of the parameter g in the centripetal potential barrier on the domain of effective values for formation of stationary bounded states and the effect of domain of the parameter g on the energy spectrum are discussed in detail.
详细讨论了有心势垒项的参量对于形成体系束缚定态的有效取值区域，及该参量的不同取值区域对能谱的影响。 - Effects of Movement of Lift in g Pipe on Its Flow Parameter
深海采矿扬矿管的运动对流动参数影响的研究 - The measuring capability index C g is an important parameter for the assessment of testing devices. The character of C g is represented and analyzed, and applications of C g are introduced by some examples.
对评定检测器具的重要指标&测量能力指数Cg的本质进行了阐述和分析，并结合实例介绍了其应用。 - The influence of the quantization parameter g and the generalization parameter r in the CMAC model on the assessment results is analyzed. If g is larger, the generalization ability is better, but the difference of degradation states is not obvious.
分析了CMAC中泛化参数g和量化参数r对评估结果的影响，g越大，CMAC的泛化能力越好，但各退化状态之间的区别越不明显； - The stable cavity condition is obtained by ABCD law and equivalent G parameter method.
利用ABCD传输矩阵理论及等效G参数法计算了稳腔范围。 - Viscous parameter G can be got by making use of generalized Burgers model. Based on rut prediction of shell a new method to forecast the unrecovered deformation is put forward.
利用广义Burgers模型分析得出了材料的粘性变形参数&粘性变形柔量G，并结合壳牌的车辙预估方法提出了沥青稳定基层永久变形的预估方法。 - All e admissible and G admissible linear estimators of the common mean matrix parameter
共同均值矩阵参数的所有E-可容许和G-可容许线性估计 - Among all kinds of spin relaxation processes in many different materials, the key problem is how to change the parameters, such as electric field, magnetic field, temperature, strain, effective g parameter and so on, to control spin relaxation in a controllable way.
对于不同材料中的各种弛豫机制，关注的重点在于如何能够在实验上以一种可以控制的方式来改变可调参数从而达到控制自旋弛豫过程。 - Begin with the general theory of resonators, we discuss the design of high power green laser resonators and simulate G parameter of peculiarly condition in the third chapter.
第三章从激光谐振腔的一般理论出发，讨论了大功率绿光谐振腔的设计，模拟了特定条件下的G参数变化； - By using the ABCD transmission matrix and "g" parameter, an optimum linear laser resonate is designed.
采用ABCD传输矩阵法和等效g参数法设计出最佳的直腔结构。 - The software consists of main UI program, interface with AutoCAD, parameter setting module, data processing and G code conversion module, etc. The AutoCAD interface module is used to read CAD drawing and extract information about curve need to process.
该软件主要包括主界面程序、与AutoCAD接口模块、参数设置模块、数据处理及加工G代码转换模块等部分。